June (A Brett Saison)

I'll keep this one short. This was a beer I brewed back in August 2016 in honor of my soon-to-be-born niece, June. I realized I never posted the recipe. The idea was to brew a saison that would start out awesome and continue to gain character and get better with age, just like my awesome niece. Here's the label I designed for the beer:

Recipe Specifications
Batch Size (fermenter): 3.1 gal
Estimated OG: 1.053 SG
Estimated Color: 4.5 SRM
Estimated IBU: 29.1 IBUs
Brewhouse Efficiency: 65.00 % (No-sparge)
Boil Time: 90 Minutes

Fermentables:
70% - Pilsner Malt
20% - Vienna Malt
10% - White Wheat Malt
(Acid malt also used to get pH in right range)

Hops:
.85 oz. East Kent Goldings (Pellet, 4.8% AA) @ 60 minutes - 25.8 IBUs
1 oz. Mosaic (Pellet, 12.3% AA) @ 1 minute - 3.3 IBUs

Yeast:
The Yeast Bay Saison Blend II - .5L starter
The Yeast Bay Beersel Brettanomyces Blend (added after primary)

Water:
RO filtered water - added 3 grams of calcium chloride, 2 grams of gypsum, and 1.2 grams of epsom salt to the strike water.

Mash:
Single-infusion @ 150 degrees (No-sparge)

Notes:

Brewed on 8/13/16. 

No-sparge brew. Used RO water with 3 grams of calcium chloride, 2 grams of gypsum, and 1.2 grams of epsom salt added to strike water. 

Mash pH came in at 5.37. 

OG came in at 1.052. Pitched yeast (.5L starter) at 69 degrees.

Ramped up temperature to 79 degrees over the course of 8 days.

8/30/16 - Pitched the Beersel Brett Blend.

9/10/16 - Bottled the batch. Targeted 2.7 volumes of CO2. 

Read More

Coffee Vanilla Porter

Every once in a while, I diverge from Belgian and farmhouse styles to brew something of the English persuasion. For this batch, I decided to brew up a Porter, which has been one of my favorite beer styles for a long time. It had been a while since I brewed one, so I decided to re-brew a recipe from a small-batch Robust Porter I had made about two years ago that turned out to be quite delicious. 

When I put together that recipe a couple of years back, I had just finished reading through Ray Daniels' book, Designing Great Beers. His analysis of NHC award-winning beers and their ingredients was incredibly helpful in putting together the fairly complex malt bill for this beer.  The original brew was just a 2-gallon batch that I split into two 1-gallon jugs. One jug was left alone to be a straight-up untouched porter, and the other got 1-ounce of coarsely-ground Kona coffee beans and one split-and-scraped vanilla bean after primary fermentation. The coffee & vanilla version turned out to be the favorite in our house, so I'm now scaling it up two years later for a full 3-gallon batch, but with just a couple of differences. 

The first difference was the choice in coffee. After sniffing (literally) around the bulk coffee section at my local grocery store, I landed on an organic French Vanilla coffee, which I'm hoping will help to pop the vanilla character of the beer, which I felt was lacking a bit in the original version. I considered making a cold brew with the beans and adding it to the beer to taste, but with the original version, I was actually pretty darn happy with the coffee character I got by adding the beans to secondary for a week, so I decided to stick with that process. 

The other differences with this batch are in the water profile and the mash/lauter process. For the original batch, I used tap water that had been painstakingly filtered through a Brita pitcher, whereas for this batch, I am using reverse osmosis-filtered water and adding back in gypsum and calcium chloride. In the sparging department, I went with the batch-sparge method the first time I brewed this, but this time around I will be using the amazing and time-saving no-sparge technique.


Recipe Specifications
Batch Size (fermenter): 3.1 gal
Estimated OG: 1.055 SG
Estimated Color: 28.6 SRM
Estimated IBU: 38.2 IBUs
Brewhouse Efficiency: 65.00 % (No-sparge)
Boil Time: 90 Minutes

Fermentables:
75% - 2-Row Malt
8% - Dark Munich Malt
6% - Chocolate Malt
6% - Crystal 60L
3% - Carapils Malt
2% - Black Malt

Hops:
.68 oz. Northern Brewer (Pellet, 7.3% AA) @ 60 minutes - 30.1 IBUs
.37 oz. East Kent Goldings (Pellet, 4.8% AA) @ 20 minutes - 6.1 IBUs
.35 oz. East Kent Goldings (Pellet, 4.8% AA) @ 5 minutes - 2.0 IBUs

Yeast:
White Labs WLP002 English Ale - .5L starter

Other:
3 oz. French vanilla coffee beans (very coarsely ground) - 6 days secondary
3 split and scraped vanilla beans - 6 days secondary

Water:
RO filtered water - added 3 grams of calcium chloride and 2 grams of gypsum to the strike water.

Mash:
Single-infusion @ 155 degrees (No-sparge)

Notes:

Brewed on 7/17/16. 

First no-sparge brew using new 10 gallon mash tun. Used RO water with 3 grams of calcium chloride and 2 grams of gypsum added to strike water. 

Mash pH came in at 5.25. 

Efficiency was lower than expected with no-sparge in new mash tun. Increasing boil to 90 min and adding 6 oz of honey with a few minutes left in the boil to get closer to my target. 

Pitched entire .5L starter into wort at 67 degrees.

7/31/16 - SG is at 1.012. Added 3 oz. of coarsely ground French Vanilla organic coffee beans and 3 vanilla beans, split and scraped. 

8/5/16 - Kegged. Shooting for 2.5 volumes of CO2. 

Read More

Thai Basil Tripel

I've been lucky enough to live within a short drive of The Bruery since they opened in Orange County in 2008 and I've been a big fan pretty much since the beginning. While I love their funky and sour beers, I've also always been a huge fan of their Tradewinds Tripel, a Belgian-style tripel brewed with Thai basil and rice and have been wanting to brew my own version of it for a good while. It kept getting moved to the back burner, but I finally decided to take a stab at it. 

Several years back, Patrick Rue of The Bruery, was on one of the Brewing Network shows and he gave out the recipe. It's a pretty simple grain bill consisting of 2-Row, Dark Munich, and Flaked Rice. For yeast, they use their house strain, so the best option for a clone is to either harvest yeast from one of their bottles and grow it up to a pitchable amount or to use WLP570 (Belgian Golden Ale) from White Labs, which Patrick says that it's the closest commercial option out there. 

The magic in this beer though, of course, comes from the Thai basil. For the first batch of The Bruery's beer, they used Thail basil leaves and blossoms that had been growing in Patrick's back yard. Patrick recommended using a rate of 1/4 oz. of basil per 5 gallons of beer at flameout, with a majority of the addition coming from the blossoms rather than the leaves, as he believed the blossoms were most responsible for the beer's unique character. 

In most Tripels, a fairly large portion of sugar is added to lighten the body, but in The Bruery's Thai-inspired recipe, they use flaked rice instead. Unfortunately, when I went to buy the ingredients for my beer, I found out that my local homebrew shop doesn't carry flaked rice, so I made the decision to go with flaked corn in its place. Both serve the same purpose of lightening the body of the beer, although I've read the argument that flaked rice can provide more of a crispness while flaked corn can provide more creaminess. That may be the case, but I'm going for the flaked corn and I probably won't lose much sleep over it. 

It actually turns out that most grocery stores don't carry Thai basil, so I had to search around a bit to find it. I ended up making the trek to a nearby town that has a couple of Asian markets and found some there with lots of glorious little blossoms on it. (I also saw fish heads for sale, but I opted to pass on those for this beer.) I want the basil character in my beer to be a little more intense, so I decided to go heavy-handed, using close to 1/4 oz. in this little 2-gallon batch, with the ratio being something like 70% blossoms / 30% leaves. 

Same as my last batch, I decided to use the no-sparge process and I also pitched Clarity Ferm along with the yeast to turn this into an essentially gluten-free beer.  I had a small hiccup on this batch where I forgot to update the mash tun deadspace volume in BeerSmith, so I ended up adding more water than necessary which left me with a lower gravity beer than I intended. I increased my boil time which helped a bit, but I still fell pretty short of my target OG of 1.074, instead coming in at 1.065. Not a huge deal - I'll just end up with a slightly more sessionable Tripel. 

Recipe Specifications
Batch Size (fermenter): 2.1 gal
Estimated OG: 1.074 SG
Estimated Color: 5.5 SRM
Estimated IBU: 26.2 IBUs
Brewhouse Efficiency: 71.00 %
Boil Time: 90 Minutes

Fermentables:
72% - 2-Row
14.5% - Flaked Corn
10% - Dark Munich
3.5% - Acidulated Malt

Hops:
.15 oz. Warrior (Pellet, 15.8% AA) @ FWH - 22 IBUs
.75 oz. Saaz (Pellet, 3.6% AA) @ 5 minutes - 4.2 IBUs

Yeast:
White Labs WLP570 Belgian Golden Ale

Other:
.23 oz - Thai basil leaves and blossoms (added at flameout)
Clarity Ferm - pitched alongside the yeast

Water:
RO filtered water - added 2.5 grams of calcium chloride and 2.5 grams of gypsum to the strike water.

Mash:
Single-infusion @ 151 degrees (No-sparge)

Notes:
Brewed on 6/12/16.

Used the no-sparge method. 100% RO water with 2.5 grams of gypsum and 2.5 grams of calcium chloride in the mash.

Mash pH came in a little lower than my target at 5.18 pH.

I messed up and forgot to update mash tun deadspace to the correct number in BeerSmith, so I ended up with a higher pre-boil volume and a lower gravity than anticipated. Increased boil time to 100 minutes - still ended up with an OG of 1.065 when I was originally planning for 1.074. I'm hoping high attenuation will still get this beer into the mid-high 7% ABV range.

Read More

Farmhouse Pale Ale

For this one, I set out to create a beer that bridges the gap between a saison and an American pale ale - a brewski that has the phenolic, fruity character and dryness of a traditional saison, but the hop aroma and flavor of a pale ale. I want the beer to be sessionable, easy-drinking, and aromatic, something that would please both the hopheads and the saison geeks. One might call it a hoppy saison or perhaps a Belgian-style pale ale, but I'm going with Farmhouse-style Pale Ale for this one. Don't question me - it just feels right. 

I'm also trying out a couple of new processes with this brew. The first is that I will be trying the no-sparge method. My normal brew process, like many other brewers, is to mash, vorlauf, run off, and then add hot water back into the grain to pull out the remaining sugars (a.k.a. sparging), vorlauf, and run off again. The no-sparge process is awesome in that you can just add the entire volume of water into the mash tun, conduct your mash, vorlauf, run off, and you're ready to start the boil. The benefit is that it saves times and some claim that it gives your beer better malt character. The downside is that you are leaving behind some sugars on the grain, so your efficiency drops, meaning you need to start out with a little more grain than normal. The other downside for me is that I have to do a slightly smaller batch to fit the entire volume of water and grain in my 5-gallon mash tun. This batch will yield around 2.5 gallons of beer in the end.

The other crazy new process I'm trying with this beer is adding an enzyme called Clarity Ferm for its gluten-reducing capabilities. I don't have a gluten-allergy per se, but I do have an intestinal disorder that is greatly helped by not consuming wheat and gluten. And I love beer. Like I really love it. Behind the good Lord, my wife, and my family and friends, it's pretty much my favorite thing. But sadly it hurts me and brings me pain and inflammation. Yeah, it's a sick, twisted world, broheims. Real sick. The beauty of Clarity Ferm though is that it reportedly produces beers that are 10ppm or under in gluten and has little to no effect on the flavor or overall outcome of the beer. That's pretty magical news for a beer lover with a gluten issue, so I'm going to try it out and see how it goes.

I could have used any number of aroma hops for this animal, but I decided to keep it simple and go with Cascade. If the beer turns out to be a winner, I would love to try it out with some of the newer American hop varieties as well. 

Recipe Specifications
Batch Size (fermenter): 2.6 gal
Estimated OG: 1.047 SG
Estimated Color: 3.8 SRM
Estimated IBU: 34.5 IBUs
Brewhouse Efficiency: 71.00 %
Boil Time: 75 Minutes

Fermentables:
86% - 2-Row
11% - White Wheat Malt
3% - Acidulated Malt

Hops:
.75 oz. Cascade (Pellet, 5.5% AA) @ 60 minutes - 32.7 IBUs
1 oz. Cascade (Pellet, 5.5% AA) @ 1 minutes - 1.9 IBUs

2 oz. Cascade (Pellet, 5.5% AA) @ Dry Hop - Adding 4 days into fermentation

Yeast:
White Labs WLP590 French Saison Ale

Other:
Clarity Ferm - pitched alongside the yeast

Water:
RO filtered water - added 2.5 grams of calcium chloride, 3 grams of gypsum, and 1.2 grams of baking soda to the strike water.

Mash:
Single-infusion @ 150 degrees (No-sparge)

Notes:
Brewed on 5/22/16.

First time trying the no-sparge method. Used 100% RO water with 3 grams of gypsum, 2.5 grams of calcium chloride, and 1.2 grams of baking soda added to strike water.

Mash pH was 5.49.

Hit OG of 1.048. 71% efficiency with no-sparge method.

Pitched yeast at around 70 degrees. Ramped temperature up to 78 degrees over the course of 4 days.

6/19/16 - Kegged. Targeting 2.8 volumes of CO2.

Read More

Northeast Pale Ale

My beer preference when it comes to both drinking and brewing, generally leans toward farmhouse, funky, and tart, but even so, I still like to get down on a hoppy pale ale every once in a while. The first really good beer I ever tried was Sierra Nevada Pale Ale. It fueled my passion for beer, inspiring me to drink and brew better beer, so I'll love it forever. Sierra Nevada set the bar for a good pale ale, and of course, it's still a good pale ale, but in the craft beer world, tastes and trends are always evolving and changing. These days, the attention of the cool craft beer kids seems to be turned to a different type of hoppy beer - the Northeast pale ale and IPA, made famous by breweries like The Alchemist, Hill Farmstead, Trillium, and Tree House. 

Unlike a lot of the hoppy beers in the past where bitterness was king, the new IPAs and Pale Ales are all about showcasing hop flavor and aroma without ripping off your taste buds with hop resin. The Northeast-style beers, specifically, are all about juicy hop flavor and aroma, usually from citrus-leaning hop varieties, a smooth and silky mouthfeel, and a trademark haze or cloudiness. I decided to try my hand at brewing one of these animals. 

After scouring the beer dark web for information, I put my recipe together. From what I gathered, these are some of the techniques needed to get the Northeast-style down:

•  The bulk of the hopping should happen in the whirlpool and dry hopping stages. Go easy on the boil additions and heavy-handed on the whirlpool/dry hops. 

•  Use an English yeast strain. I opted to go with White Labs Dry English Ale Yeast (WLP007) as it's supposedly the strain used by Trillium (and my local homebrew shop had it on hand). Many other breweries apparently use the Wyeast London Ale III strain. 

•  Add a portion (or possibly all) of the dry hops while fermentation is still under way. This has some effect on the flocculation properties of the yeast, resulting in a hazier beer and may also contribute to the perceived "juiciness" of the beer. 

•  Use a sizable portion of wheat or oats (or something similar) to give a silkier mouthfeel to the beer. 

•  Opinions differ here, but consider getting your Chloride-to-Sulfate ratio closer to 1:1. The increased chloride can help round out the flavors, possibly helping out with the "juicy" factor. 

•  Minimize exposure to oxygen. Ideally, you would transfer the beer via CO2 and purge every vessel with CO2 that the beer goes into. (Out of laziness and lack of equipment, I just racked the beer with my auto-siphon, although I did purge the keg before filling it.)

For my beer, I decided to go with Galaxy hops as the star and Columbus as the bittering and backbone hop. I got some help with the hop addition amounts from a BYO article that contained a Trillium Fort Point clone recipe, although I changed mine up a bit, using Galaxy instead of Citra, increasing the overall amount of dry hops, and splitting the dry hops into two additions. I'm excited to see how how this one turns out.


Recipe Specifications
Batch Size (fermenter): 3.7 gal
Estimated OG: 1.055 SG
Estimated Color: 4.2 SRM
Estimated IBU: 36.6 IBUs
Brewhouse Efficiency: 70.00 %
Boil Time: 75 Minutes

Fermentables:
80.5% - 2-Row
12% - Flaked Oats
6% - Cara-Pils
1.5% - Crystal 15L

Hops:
.18 oz. Columbus (Pellet, 13.4% AA) @ 60 minutes - 12.4 IBUs
.56 oz. Columbus (Pellet, 13.4% AA) @ 10 minutes - 14.1 IBUs

1.45 oz. Columbus (Pellet, 13.4% AA) @ Whirlpool (30 minutes)

1 oz. Columbus (Pellet, 13.4% AA) @ Dry Hop - Added 3 days into fermentation
1 oz. Galaxy (Pellet, 14.8% AA) @ Dry Hop - Added 3 days into fermentation

3 oz. Galaxy (Pellet, 14.8% AA) @ Dry Hop (4 days) - Added after primary fermentation

Yeast:
White Labs WLP007 Dry English Ale Yeast

Water:
RO filtered water - added 5.5 grams of calcium chloride and 5.5 grams of gypsum to the strike water. Aiming for around 140ppm sulfate and 125ppm chloride.

Mash:
Single-infusion @ 153 degrees

Notes:
Brewed on 5/1/16.

65 min mash @153 degrees. Mash pH of 5.47.

After boil, cooled to around 180 degrees, then pitched in whirlpool hops and steeped for 30 minutes.

Cool wort to around 70 degrees and pitched WLP007 Pure Pitch (no starter). Cooled to 65 once fermentation kicked off.

5/4/16 - 10:30pm - added 1oz of Columbus and 1oz of Mosaic hops directly to fermenter.

5/8/16 - Transferred to 12L Spiedel fermenter. Appearance is cloudy. Aroma is great. Taste is good but still a bit on the harsh after only a week in the fermenter. SG is at 1.013. Added 3oz of Galaxy dry hops in a muslin bag.

5/12/16 - Removed dry hop bag and moved fermenter into fridge to crash cool.

5/15/16 - Kegged beer. Targeting carbonation level around 2.6 volumes.

Read More